Plastic Extruder HDPE Pipe Machine/Extrusion Line HDPE Tube Production Line (HSD)
---Pipe diameter range:16-63mm 75-250mm 160-315mm 200-450mm 315-630mm 500-800mm 630-1200mm
---The extrusion line comprise equipments and devices as below,
1set Vacuum loader
1set Hopper dryer
1set High-effeciency single screw extruder
1set 25/25 single screw extruder for mark line
1set Vacuum calibration table
2sets Water spraying tank
1set Hauling machine
1set Cutting machine
1set Stacker
| 1 | Automatic Vacuum Feeder and dryer | 1 set |
| 2 | SJ-120/33 high efficiency Single Screw extruder | 1 set |
| 3 | Co-extrusion die mould(315,400,450,500,630 mm) | 6 sets |
| 4 | SJ-25/25 marking line extruder | 1 set |
| 5 | SRQJ-630 6m vacuum calibrating stand | 2 sets |
| 6 | SRQJ-630 5.5m spray cooling flume | 2 sets |
| 7 | SRQJ-630 6 caterpillar pulling machine | 1 set |
| 8 | SRQJ-630 planetary cutting machine | 1 set |
| 9 | SRQJ-6000 stacker | 1 set |
| 10 | PLC (Siemens ) central control system | 1 set |
HDPE pressure Pipe Extrusion Line is a pipe extrusion line developed by HSD company through assimilate and master technology introduced from abroad. It is applicable for extrusion of PE, PP, PB, PERT, ABS etc. This PE pipe production line can instead extrusion line imported from abroad.
Pipe advantages and Usage
---HDPE water supplying pipe is with advatages of good hot melt, flexibility, corrosion resistance, and aging tolerance.
---- HDPE pipe is widely used in municipal water suuplying, city gas transportation and other areas.
Main machine- High-effeciency single screw extruder
---Single screw is with barreir & mixing head; barrel is new model with slotting (channel), Both make security of good jellification, large output and stable performance.
Spiral dihead & 25/25 co-extruder for mark line
---Diehead is spiral model. It has advantages of low melt temperature, good mixing, low cavity pressure, and stable performance.
----Special calibrating and cooling system. We use water film lubrication and water-ring cooling to fit for requirements of HDPE and PP material, to make sure accurate diameter and roundness of thick wall pipe when they are extruded at high speed.
Production range:
| Style | PE16/63 | PE75/160 | PE160/315 | PE200/450 | PE-315/630 | PE-500/800 | PE-710/1200 |
| Main extruder | SJ-65/30 | SJ-75/33 | SJ90/33 | SJ90/33 | SJ-120/33 | SJ-120/33 | SJ-150/33 |
| Main motor | 55kw | 90kw | 132kwDC | 160kwDC | 185kwDC | 250kwDC | 400kwDC |
| Pipe diameter | Φ16-63mm | Φ75-160mm | Φ160-315mm | Φ200-450mm | Φ315-630mm | Φ500-800mm | Φ710-1200mm |
| Capacity | 80-100kg/h | 180-250kg/h | 280-400kg/h | 350-500kg/h | 450-600kg/h | 700-900kg/h | 800-1200kg/h |
Main machine- High-effeciency single screw extruder
---Single screw is with barreir & mixing head; Barrel is new model with slotting (channel), Both make security of good jellification, large output and stable performance.
Product Tags:
|
|
Plastic Extruder HDPE Pipe Machine/Extrusion Line HDPE Tube Production Line (HSD) Images
|
